Unlike most external hard drives, WD (Western Digital) My Passport drives are more than just a simple wrapper around a regular hard drive. WD have integrated the USB port straight onto the main circuit board. This means if your external drive fails, you can’t easily remove it to attach to a PC.
Symptoms of WD MyPassport Failure
- LED constantly flashing / blinking
- LED not lighting at all
- Clicking / ticking noise
- Disk is not formatted. Do you want to format it?
- Unable to see your data in Windows or macOS
- Unable to copy or read files
If you have problems with a WD My Passport drive, you can make a few checks to see where the fault lies. Be aware that opening the external drive case will probably void your warranty. If there is important data on the drive you should seek professional data recovery advice before you try anything.
That’s the warning out the way, so lets have a look at some troubleshooting.
- First check all cables are plugged in securely, and not damaged or frayed. If you have an identical spare cable you can try it, just be gentle
- There is no point dismantling a WD MyPassport drive, as there is no SATA connection inside.
- It’s worth trying the external drive on another computer. If it seems to work you should copy the data off straight away. The drive could still be faulty & fail again soon.
- Whatever you do, don’t dismantle the actual hard drive. Hard drives are built in controlled clean-air environments and even the smallest spec of dust can cause permanent damage to the drive.
- These external drives are quite unique in the way they work. It is not possible to replace the circuit board (PCB) on these disks, as your PCB contains important encryption keys. On the offchance that a replacement PCB worked, your data would be scrambled anyway without access to specialist decryption tools.
If you are looking for a data recovery service for your external hard drive have a look at our external drive recovery services.