Following a fire at a science lab, five hard drives had sustained damage. Although hard drives often survive a fire, they can sometimes be damaged more by the water used to bring the blaze under control. Fortunately for the lab involved, somebody had managed to extract the hard disks from the scene and quickly bag them. It is critical to work fast with fire and water damage, before corrosion takes hold.
The lab have been using our data recovery services since 2005 so the technical department knew exactly where to send the disks.
Cleaning and Decontamination
To maximise the chances of recovery, we have a strict procedure for fire and water damaged disks. First the outside covers of the drives are cleaned of any loose soot and all electronic components are labelled and removed. The hard drive carcases then get thoroughly cleaned and inspected for signs of water ingress or damage to the protective seals. If the damage has transferred inside the drive then it will be taken into our cleanroom for internal decontamination and cleaning. The electronic parts of the disks are dealt with separately. First they are dusted of loose debris, and then immersed in a chemical bath. This removes contaminants from any connectors or contact surfaces, and also helps remove anything that could cause the electronics to malfunction when powered on. The circuit boards are then dried and tested for faults before being reattached to the hard drives.
Once cleaning and decontamination is complete, the drives are reassembled and attached to an imaging machine. The drives are copied as fast as possible, as they may have been exposed to temperatures outside of their specified design. This process means that each sector is only read a single time and then the disk is powered off and returned to storage. We are then free to work on the copies. It is part of our standard data recovery procedure, but all the more important in this case.
Our strict and thorough process for fire and water damaged drives meant that we had a 100% success rate from these drives. Failure to follow any part of the process could have meant the difference between the data being recovered or not.