What Is Hard Drive Firmware?

Hard drive firmware is the embedded software which controls the running of your hard drive. Most of it is stored within hidden sectors on the hard drive, and in normal operation you wouldn’t know it was there. Whenever you power up a drive, the firmware makes the motor spin, starts the read / write heads, and checks against a list of bad sectors. Only then will the computer be able to access the data area and allow you to see your files. If there is a problem with the firmware, the drive will get stuck and you won’t be able to access your data at all.

Symptoms.

Failed firmware is almost impossible to diagnose without specialist equipment. In fact, it is hard to confirm that the firmware is faulty at all. Many hard drive problems manifest themselves in the same way; by clicking, or spinning down, or just generally not being identified by the PC. You shouldn’t start changing components until you know where the problem lies.

Repair.

In the early days, most firmware could fit onto the electronic circuit board; simply swapping a damaged PCB with a good one was a common fix. Firmware is now too large to fit on the PCB, so the PCB contains just a very simple boot loader which starts off the drive and then loads the firmware from the disk surface. This means that swapping the PCB is no longer a common fix, and won’t work on most modern hard drives.

We have specialist hardware and software that allows us to check and repair the firmware on most hard drives. We have also dealt with many of these problems before and have a huge database of previous experience to draw on.

Leave a Reply

Your email address will not be published. Required fields are marked *